Non-standard chain usually how to clean and maintain
Non-standard chain usually how to clean and maintain, mainly from the following points:
1. Do not use strong acid or alkaline cleaning agents (such as rust remover), because these chemicals will cause damage or even break the chain.
2. Do not use a chain washing machine with added solvent to clean the chain, this cleaning method will definitely damage the chain.
3. Avoid using organic solvents such as stain removal oil, which will not only damage the environment but also wash off the lubricating oil in the bearing part.
4. Clean your chain after every ride, especially in rainy and humid environments.
5. Be careful to use a dry cloth to wipe the chain and its accessories.
6. If necessary, use an old toothbrush to clean the gaps between the chains.
7. Also don't forget to clean the front transmission and rear transmission guide wheel.
8. Use a brush to remove the dirt and mud accumulated between the chains, and if necessary, use warm soapy water to assist.
